30
Sticks: 4 basic channel control joysticks.
Pots: S1, 6P, S2, they can be configured to:
None
Pot
Multipos Switch
Pot with detent
Max Bauds: The maximum baud rate of the external module can be switched
between 115200 and 400000.
Bluetooth: Can be set to Bluetooth Telemetry or Bluetooth Trainer mode, the default
is off.
Name: Enter the name of the Bluetooth connection.
ADC filter: This setting can be used to turn the analog to digital converter's filter
on/off.
Battery calibration: If you have a multimeter, you can enter the measured battery
voltage to calibrate the value displayed on the remote.
3.3. Version
This page displays firmware related information. The screen displays the JumperTX
version number, the release date and time, and the firmware version number.
3.4. Model Select
The Model Select menu allows you to select an active model and also allows users to create,
copy, move or delete models. Selecting the "Create model" option will launch the "New Model
Wizard", which will guide the user through the process. Basic control settings, if you choose not
to use the wizard, simply press the RTN button to manually set the model. (Because the model
is stored on the SD card, there is no limit to the number of models you can set)
To Next Page
Loading...
