23
Inactivity: No action alarm for a long time. When set to 0, the alarm is turned off.
Sound off: Check to turn off the sound.
Check RSSI on Shutdown: Check to enable this alarm, which will be triggered if the
remote is turned off without the aircraft being powered off.
Backlight
Mode
ON: The backlight is always on.
Both: The backlight will illuminate when the remote control is in operation.
Controls: The backlight will illuminate when the remote control is in operation, but the
button will not light.
Keys: The backlight will illuminate when any key is pressed.
OFF: The backlight will not light when the remote control is operating.
Duration: Backlight duration.
ON brightness: Controls the brightness when the display is turned on.
OFF brightness: Controls the brightness when the display is off.
Alarm: The backlight flashes when the alarm is activated.
GPS
Time zone: Adjust the time according to UTC, which can be set between -12 and +12.
Adjust RTC: If enabled, the remote time will synchronize the GPS time on the model by
postback.
Coordinate format: coordinate format (DMS= Degrees, Minutes, Seconds=degrees,
minutes, seconds)
Country code: If you live in the US, Europe or Japan, you must select your country to
ensure that the remote control meets the requirements of your region.
Voice language: The language of the alarm voice.
To Next Page
Loading...
