To Next Page

To Previous Page

1298.GB

F 8

4.1 Operating material

Handling operating material: Consumption type material must always be handled

properly. Manufacturer's instructions to be observed.

Improper handling endangers health, life and environment. Operating material must

only be stored in containers conforming to specification. They might be inflammable

and must not come into contact with hot components or open fire.

When filling in consumption type materials, use clean containers only. It is prohibited

to mix consumption type materials of different grades or qualities, except if mixing is

expressively prescribed in these operating instructions. -This instruction may only be

ignored, if another mixing ratio is explicitly prescribed in this manual.

Avoid any spilling. Spilled liquid must be removed immediately using a suitable bin-

ding agent, and the mixture of consumption type material and binding agent is to be

disposed of according to the regulations.

* In addition 2% additive 68/D from Dea Fuchs

Qty Description Used for:

*A 33 l Hydraulic oil

H-LPD22

Hydraulic system

B 2.5 l SAE 80 EP API GL 4 Transmission

D 0.18 l SAE J 1703

FMVSS 116

DOT 3 and DOT 4

Hydraulic

braking system

E Multi-purpose Lithium

grease KP 2 (N)

DIN 51502

General

F Multi-purpose Lithium

grease

KPF L2 N (M) with MOS

DIN 502

Toothed racks

G Chain spray Hoisting chains

H High-temperature grease Front wheel bearings