Jungheinrich KMS 100 - Changing Hydraulic Oil Filter

F 11
1298.GB
5.8 Cleaning the vent filter
Screw out the vent filter together with the
oil dip stick (8) and clean with compres-
sed air or cleaning solution.
m
Used filters must be disposed of proper-
ly.
5.9 Changing of hydraulic oil filter
– Screw off the hydraulic oil filler cap (9).
– Change the filter insert; if the O-ring is
damaged, it must be replaced, too.
Slightly oil the O-ring before insertion.
– Remount the filler cap.
F 11
1298.GB
5.8 Cleaning the vent filter
Screw out the vent filter together with the
oil dip stick (8) and clean with compres-
sed air or cleaning solution.
m
Used filters must be disposed of proper-
ly.
5.9 Changing of hydraulic oil filter
– Screw off the hydraulic oil filler cap (9).
– Change the filter insert; if the O-ring is
damaged, it must be replaced, too.
Slightly oil the O-ring before insertion.
– Remount the filler cap.