05.10 EN
114
6.11 Sideshift Centre Position
Automatic sideshifter centring control
Requirements
– Checks and operations performed before
starting daily operation ((see "Checks and
operations to be performed before starting
daily operation" on page 61)).
– Check automatic sideshifter centring with the
function key (108).
Procedure
• Press and hold down on the function
key (108): the sideshifter goes to the centre
position.
Z Releasing the key interrupts the load movement.
The sideshifter is centred.
6.12 Fire extinguisher
Procedure
• Open the fasteners (172)
• Pull the fire extinguish out of its bracket
Z To operate, refer to the illustrations on
the fire extinguisher
km/h
R
108
172
To Next Page
Loading...
Need help?
General
