05.10 EN
72
4.2 Preparing the truck for operation
Z The truck should only be operated from
the driver’s seat. Do not run up the engine
in idle. The engine soon reaches
operating temperature at a moderate
charge and when the speed alternates.
Only fully charge the engine once it has
reached operating temperature.
Switching on the truck
Requirements
– For checks and operations to be
performed before starting daily operation,
(see "Checks and operations to be
performed before starting daily operation"
on page 61).
Procedure
• Unlock the Emergency Disconnect switch
(77), to do this
• Turn the rotary button left until the
switch unlocks.
• Insert the key in the key switch (79) and
turn it clockwise as far as it will go to the “I”
position.
S
T
A
R
T
77
79
78
0
I
To Next Page
Loading...
Need help?
General
