35
05.10 EN
2.3 Loading with another industrial truck
WARNING!
The truck can be damaged
The truck to be loaded can get damaged when loading with another industrial truck.
XOnly trained specialist personnel should load the truck.
XUse only trucks with sufficient capacity for loading.
XOnly for loading and unloading.
XThe forks of the second industrial truck must be sufficiently long
XTransporting over long distances prohibited.
Loading the truck with a second industrial truck
Requirements
– Park the truck securely, Siehe “Parking the truck securely” auf Seite 76.
Procedure
• Raise the truck with the forks at the side between the axles.
• Raise the truck slightly and make sure it is securely positioned on the forks. If
necessary adjust or secure the forks with stops.
• Carefully load/unload the truck, (see "Lifting, transporting and depositing loads" on
page 85).
• Lower the truck slowly onto the ground and prevent it from rolling away.
The truck is now loaded.
To Next Page
Loading...
Need help?
General
