05.10 EN
78
4.6 Travel
WARNING!
Improper travel can result in accidents
XDo not get up from the driver’s seat during travel.
XDo not drive the truck unless your are wearing a seat belt and the panels and doors
are properly locked.
XMake sure that the travel area is clear.
XAdapt the travel speed to the conditions of the route, the work area and the load.
XTilt the mast back and raise the fork carriage approx. 200 mm.
XMake sure you have enough visibility when reversing.
Travel
Requirements
– Truck prepared for operation, (see "Preparing
the truck for operation" on page 72).
Procedure
• Release the parking brake, to do this press the
parking brake button (103).
• Select the travel direction
with the travel direction switch (80).
• Select the travel speed if necessary, to do this
press the slow travel button (110) or the
program select button (102/101).
• Raise the fork carriage approx. 200 mm.
• Tilt the mast back.
• Apply the accelerator pedal (71). The travel speed is governed by the accelerator
(71).
The truck travels in the direction selected.
km/h
R
103
102101
110
71
73
56
56
57
80
80
To Next Page
Loading...
Need help?
General
