173
05.10 EN
6.8 Checking electrical fuses
Checking electrical fuses
Requirements
– Prepare the truck for maintenance and repairs ((see "Preparing the truck for
maintenance and repairs" on page 151)).
Procedure
• Open the rear cover of the truck, (see "Opening the rear panel" on page 151).
• Remove the electrical system cap.
• Check condition and rating of the fuses in accordance with the table.
• To do this: Insert the fuse to be check in the fuse socket (53 F21).
• If the fuse is intact the LED will be lit.
• Replace any damaged fuses in accordance with the table.
• Close the electrical system cap.
• Close the rear cover of the truck.
The electrical fuses are now checked.
To Next Page
Loading...
Need help?
General
