05.10 EN
154
Closing the engine cover
Procedure
• Raise the engine cover slightly and hold it.
• From the 70° stage push in the red lock (197) of the right hand gas pressure spring.
The engine cover is unlocked.
• Lower the engine cover as far as the 50° stage.
• Raise the engine cover again slightly.
• From the 50° stage push in the red lock (197) of the left hand gas pressure spring.
• Close the engine cover and make sure it is locked correctly.
• Move the backrest back, move the armrest up, push back and lock the driver’s seat.
• To adjust the seating positoin and steering wheel position to your requirements,
(see "Adjusting the driver’s seat" on page 64).
To Next Page
Loading...
Need help?
General
