05.10 EN
52
Z *If the truck is equipped with an ISM access module or Can Code, refer to the “ISM
Access Module” or “Can Code” operator manual.
Item Control /
Display
Function
70 “Reverse” accelerator
twin pedal control
o The truck reverses when actuated. Provides
infinite control of travel speed.
71 Accelerator pedal t Infinite travel speed control.
72 “Forward” accelerator
twin pedal control
o The truck travels forward when actuated.
Provides infinite control of travel speed.
73 Brake pedal t Upon activation, the truck brakes to a halt
immediately.
74 Steering wheel t Steers the truck.
75
SOLO-PILOT t Operates the following functions:
– Forward / reverse travel direction (not with
dual pedal operation)
– Load handler raise / lower
– Mast forward / reverse tilt
– Horn switch
– Sideshifter left / right (o)
– Auxiliary hydraulics (o)
MULTI-PILOT
o
76
ISM access module
o
Switches the truck on*
CANCODE
77 Emergency Disconnect
switch
t Switches control current on and off in
emergencies.
78 Start button t Starts the engine when the key switch is on.
79 Key switch
t Switches control current on and off.
Removing the key prevents the truck from
being switched on by unauthorized
personnel.
t= Series equipment o= Optional equipment
To Next Page
Loading...
Need help?
General
