05.10 EN
88
Tilting the mast forward / backward
Requirements
– To prepare the truck for operation, (see
"Preparing the truck for operation" on
page 72)
Procedure
• Pull the Solo-Pilot lever (145) in direction R to
tilt the mast back.
• Push the Solo-Pilot lever (145) in direction V
to tilt the mast forward.
The mast is now tilted back / forward.
Z When the limit position for the operation has been reached (there will be a noise
from the pressure relief valve) release the lever. The lever will revert automatically
to neutral.
Positioning the integrated sideshift (option)
Requirements
– To prepare the truck for operation, (see
"Preparing the truck for operation" on
page 72)
Procedure
• Pull the Solo-Pilot lever (146) in direction R to
move the load handler to the right (from the
driver’s viewpoint).
• Push the Solo-Pilot lever (146) in direction V
to move the load handler to the left (from the
driver’s viewpoint).
The sideshifter is now positioned.
Z When the limit position for the operation has been reached (there will be a noise
from the pressure relief valve) release the lever. The lever will revert automatically
to neutral.
R
V
145
R
V
146
To Next Page
Loading...
Need help?
General
