Table 16: Optical Interface Support for SFP+ Gigabit Ethernet Transceivers (continued)
ValueSpecificationEthernet Standard
EX-SFP-10GE-LRModel Number10GBASE-LR
10 GbpsRate
LCConnector Type
DualFiber Count
1310 nmTransmitter Wavelength
–8.2 dBmMinimum Launch Power
0.5 dBmMaximum Launch Power
–18 dBmMinimum Receiver Sensitivity
0.5 dBmMaximum Input Power
SMFFiber Type
9/125 µmCore/Cladding Size
–Modal Bandwidth
10 km (6.2 miles)Distance
AvailableDOM Support
Junos OS for EX Series switches, Release 11.3 or laterSoftware required
Related
Documentation
Front Panel of an EX3300 Switch on page 6•
• Installing a Transceiver in an EX Series Switch on page 79
• Removing a Transceiver from an EX Series Switch on page 115
SFP+ Direct Attach Cables for EX Series Switches
Small form-factor pluggable plus transceiver (SFP+) direct attach copper cables, also
known as Twinax cables, are suitable for in-rack connections between servers and
switches. They are suitable for short distances up to 7 m, making them ideal for highly
cost-effective networking connectivity within a rack and between adjacent racks.
35Copyright © 2011, Juniper Networks, Inc.
Chapter 3: Component Specifications
To Next Page
Loading...
Need help?
General