JVC LT-32C485 User Manual

4
Initial Setup
24
Selecting the Input Source
1. Press the INPUT button to display the Input Source list.
2. Press the
buttons to select the input source that you want: Digital TV
/ Analogue TV / HDMI 1 / HDMI 2 / HDMI 3 / AV / SCART / YPbPr / DVD /
PC / USB.
3. Press the OK button to confirm your selection. If you do not press the OK
button to confirm, the TV will automatically confirm the selected input
source within 4 seconds.
Alternative
Press the MENU button to display the main menu. Press the
buttons to select the SOURCES menu and then press the OK
button. Press the
buttons to select the input source that you
want, and then press the OK button to confirm.
Channel Selection
• Press the CH / buttons repeatedly or the 0-9 buttons to select the channel.
Alternative
Press the LIST button to enter the Channel List. Then use the buttons to highlight and select the channel.
Press the OK button to view the selected channel.
• If a blocked channel is selected, the password screen will be displayed. Press the 0-9 buttons to enter the password, the
channel will then be unlocked (refer to page 39 for details on Channel Lock).
• Press the FAV button to view the Favourite List. Then the
buttons to highlight and select the channel from the list. Press
the OK button to view the selected channel (refer to page 31 for details on Channel Edit).
• Press the
button to return to the previously viewed channel.
Watching the Data Channel / Listening to the Radio (Radio Mode)
• In DTV mode, press the TV.RD button to switch between DTV / Data / Digital radio channel.
• Press the CH
/ buttons repeatedly to change the TV channel or radio stations.
Alternative
Press the LIST button to enter the Channel List. Then use the buttons to highlight and select the station.
Press the OK button to listen to the selected station.
• Press the GUIDE button to see all the stations in the Programme Guide (refer to page 49 for details on EPG).
Display Channel Information
Press the i button to view the current programme information.
Volume Adjustment
• Press the VOL + or – button to adjust the volume.
• If you wish to switch the sound off, press the
button. You can turn the volume down while your TV is in mute mode. Press
the VOL – button, you will see the volume level reduce, but you won’t hear anything at the moment. To listen to your TV at
the new lower level, press the
button again or VOL + button.
HDMI 1
HDMI 2
HDMI 3
Input Source
Digital TV
Analogue TV
ExitEXITSelect
Move
OK
D
A

JVC LT-32C485 Specifications

General

Brand	JVC
Model	LT-32C485
Category	DVD Player
Language	English