5
Customising TV Settings
37
Time Settings
Allows you to adjust power on / off time, sleep timer, OSD timer, auto standby and time zone.
1. Press the MENU button to display the main menu. Press the
buttons to select the TIME menu and then press the OK button.
PICTURE SOUND CHANNEL SOURCES
LOCK SETTINGS SYSTEM
TIME
2. Press the buttons to select the following options, and
then press
buttons to adjust each option’s setting or the
OK button to select the options.
TIME
ExitEXITSelect
AdjustMove
OK
Auto Standby
4H
Time Zone
London GMT
OSD Timer
15 S
5 S 30 S
TIME
ExitEXITSelect
AdjustMove
OK
00:20Clock
Off Time
On Time
Sleep Timer
Off
Auto Sync
On
OFF OFF
Auto Sync Allows to set the time and date manually or set automatically when receiving a digital signal.
Selects Auto Sync to On, the time and date will be set from the broadcast signal.
If you want to set the date and time manually, set Auto Sync to OFF.
Clock If Auto Sync sets to On, the date and time will be set from the broadcast signal.
If Auto Sync set to Off, you can set the date and time manually. Press the
buttons to
select Clock, then press the OK button or the
button to enter the TIME menu. Using the
buttons to select the desire date and use the 0-9 buttons and the OK button to enter
the 24 hour clock.
Off Time Allows you to set the off time that will automatically switch off the TV. Select from the
following off time options: Off / Once / Everyday / Mon~Fri / Mon~Sat / Sat~Sun / Sun.
Press the
buttons to select TIME, and then use the OK button and the buttons to
highlight the hour or minute digit. Use the 0-9 buttons to enter the desired off time.
On Time Allows you to set the on time that will automatically switch on the TV and tune to the source,
channel and volume you select. Select from the following on time options: Off / Once /
Everyday / Mon~Fri / Mon~Sat / Sat~Sun / Sun. Then press the
buttons to select TIME
option, and then use the OK button and the
buttons to highlight the hour or minute
digit. Use the 0-9 buttons to enter the desired switch on time. Press the
buttons to select
to Input Source option, then use the
buttons to select your desired devices, desired
channel (DTV or ATV only) and adjust the volume.
Ensure the selected input device is turn on.
Sleep Timer The sleep timer automatically switches the TV to standby after the preset time has elapsed.
The clock will be set automatically when receiving a digital signal. Time must be set before
using Sleep Timer function.
Press the
buttons to select a period of time after which the TV automatically switches to
standby mode: OFF / 10 / 20 / … / 180 / 240 min. The timer begins to count down from the
number of minutes selected.
If you turn the TV off after setting the sleep timer, the sleep timer setting will be
erased.