57
9 Using the DVD Features
Using the Built-in DVD Player
1. Insert a disc with the label side facing towards the rear of the TV.
(CD-R, CD-RW, DVD-R, DVD-RW, CD, DVD+R, or DVD+RW) Allow 10
seconds for the player to load the disc. If you insert the disc wrongly, an
error message will be displayed.
2. After the disc is inserted, the TV will change the input source to
DVD automatically and Smart NAVl will show the content of the disc
automatically.
3. If the DVD player does not automatically play the disc, press the INPUT
button to display the INPUT SOURCE list. Use the
buttons to select
DVD and then press the OK button to confirm. Press the
button on
the unit or on the remote control to start playing.
4. Press the
button on the right side panel of the TV or on the remote control
if you want to remove the disc.
Compatible Disc Types
Disc Types Disc Logo Recorded Content
DVD-VIDEO (Digital Versatile Disc)
AUDIO + VIDEO
DVD±RW (Audio/Video format or JPEG files)
AUDIO + VIDEO + JPEG
DVD±R (DVD Recordable - Audio/Video
format or JPEG files)
AUDIO + VIDEO + JPEG
CD-R (CD Recordable - Audio/Video format
or JPEG files)
AUDIO + VIDEO + JPEG
CD-RW (CD-Rewritable - Audio/Video
format or JPEG files)
AUDIO + VIDEO + JPEG
AUDIO-CD (Compact Disc Digital Audio)
AUDIO
Supported Formats
JPEG
• The file extensions has to be .jpg and not .jpeg.
• Pictures encoding must comply with JPEG/ISO format.
• This DVD player can only display DCF-standard still pictures or JPEG pictures such as TIFF.
Unable to Read / Play Disc!
Check the direction of DVD disc.
Check if the disc is damaged.
Check if the disc is Compatible.
Label side
faces rear
Only insert 12cm discs. Do not insert or play 8cm discs; they will get stuck.
Some recorded files may not be played due to the type and format of the disc or condition of the recording.
Chapter
9
To Next Page
Loading...
Need help?
General
