Chapter 7
184 Kaba Ilco Lodging Access Control System
Steps to obtain the audit trail from a lock
1. Swipe a keycard or enter a PIN having a Programming authorized user level.
2. Press 9 or use the down <T> arrow followed by < > to reach the
“Audit/Report” menu.
3. Press 1 or < > to reach the “Lock Audit” menu.
4. Press 1 or < > to select the “Audit Lock” option. If there are other audits
already stored in memory, the following message will appear.
The FDU can store up to 10 lock audits in memory. To keep the existing audits,
enter 2. The new audit will be added to the audit list. To erase the existing
audits, enter 1. The following screen will then be shown:
To Next Page
Loading...
