EasyManua.ls Logo

Kaba ILCO FDU - Reading and Encoding Keycards; Software Version and Operation Modes

Kaba ILCO FDU
276 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Front Desk Units - Using and Programming
Kaba Ilco Lodging Access Control System 23
In both formats, the left <W> arrow deletes the last digit entered, as in any digital input in
various menu items.
3.2.4 Reading and Encoding Keycards
The FDU's built-in magnetic stripe encoder has been developed to read and encode
keycards reliably. Keycards must be passed through the entire length of the slot, and at as
consistent a speed as possible to ensure correct reading and encoding every time.
Figure 3.2.4:
Magnetic stripe keycards should be placed in the slot with the magnetic stripe down and facing
away from the keypad.
3.3 Software Version and Operation Modes
The FDU has built-in software, which determines the menu functions. The FDU software
supports the following lock series:
x System 700-II Locks
x System 710 Locks
x System 710-II Locks
x System 760 Locks
x System 770 Locks
x RAC 3.5, 4 & 4XT Access Control Systems

Table of Contents

Other manuals for Kaba ILCO FDU

Related product manuals