Kaba ILCO FDU - Saving and Loading the Default Expiry Values and Features

Chapter 3
30 Kaba Ilco Lodging Access Control System
An expiry value of one month is recommended for staff Sub-
master level keycards (Section, Floor, Group, Zone, Area).
3.5.3 Saving and Loading the Default Expiry Values and Features
3.5.3.1 Saving the Default Expiry Values and Features:
All Default Expiry Values and Features are automatically saved when they are entered
with the FDU menus.
3.5.3.2 Loading the Default Expiry Values and Features:
If required, the factory default expiry values can be reloaded into the FDU.
1. Swipe a keycard having a GMA or MA authorized user level.
2. Press 7 or use the down <T> arrow followed by < > to reach the “FDU Setup”
menu.
3. Press 1 or < > to reach the “Keycard Expiry” menu.
4. Press 5 or use the down <T> arrow followed by < > to reach the “Load Factory
Expiries” menu.