Chapter 3
54 Kaba Ilco Lodging Access Control System
indicating the current parameters. No changes should be done, as the FDU maintains
these settings for an extended period of time. Without changing any of the information,
press <
> to ensure that the FDU will continue to function correctly with the other
FDUs and the locks on the property.
IMPORTANT: If the date or time is changed the system may no longer function
with other FDUs or locks on the property.
3.5.11 Using the FDU in POS Verifier Mode
In previous versions of the system the FDU and the POS (Point-of-Sale) were separate
units. As of the latest FDU model, any FDU in the facility can be used as a Point-of-Sale
verifier, to post charges manually to the guest's room or folio.
For this to occur the POS Verifier mode must be enabled. Refer to Section
3.6 part 17 – Enable POS for details on setting this feature. Each employee using POS
verifier mode should have a unique POS Authorization keycard with a different
number from 1 to 200. The POS function is the same as the Read Card function
described in Section 4.9.2 – Reading a Guest Keycard. The POS Authorization keycard
gives access to only that function. The FDU audit records each use of a POS
Authorization keycard to read guest information.
Minimum keycard required: POS Authorization
3.6 FDU Feature Reference
Certain features found within various menus in the FDU have different settings available
to a GMA authorized user level keycard. Shortcuts via the FDU keypad are indicated to
access each feature indicated in this section.
Options that are encoded on keycards are enabled or disabled based on the choice of
YES, NO or AUTO. The definitions of YES, NO or AUTO are:
YES: The FDU will offer the user the chance to add this option to the
keycard (if applicable).
NO: This FDU will not prompt the user for this feature and it will NOT be
added to the keycard.
To Next Page
Loading...
