Kaba ILCO FDU - Viewing, Printing or Sending the Lock Audit to an USB Memory Stick

Auditing
Kaba Ilco Lodging Access Control System 187
If there is no lock audit in the FDU memory, the following message is
displayed:
7.1.3 Viewing, Printing or Sending the Lock Audit to an USB Memory
Stick
Purpose: Once the lock audit is in the FDU memory, it can be
viewed, printed or sent to a USB memory stick in
whole or in part. The Front Desk Unit can create a
lock audit according to:
- Sequence of entries (all, previous 100, etc.)
- Authorization number used to encode the
keycard used for entry
- Type of keycard used for entry (Guest,
Grand Master, etc.).
In order to print, a serial printer must be connected to
the FDU and properly configured (see section 2.5).
Minimum keycard required: Programming Authorization
Steps to view or print the lock audit entries stored in the Front Desk Unit
1. Swipe a keycard or enter a PIN value having a Programming authorized user
level.
2. Press 9 or use the down <T> arrow followed by < > to reach the
“Audit/Report” menu.