Example
(v)
:
2 Pool(main door) (Reader) RAC 1 2 1
2 Pool (side door) 710-II
(vi)
n/a n/a n/a
2 Sauna (Reader) RAC 1 2 1
2 Tennis court (Reader) RAC 3 2 3
Notes:
(i) When programming the Model 3 or 4 card reader, one of the eight flexible time
zones as defined in the FDU features can be selected to restrict each of: Guest
access, Staff access and the hours that the reader will be unlocked when in
Passage mode.
If no Time Zone or Time Zone 0 is programmed, there are no restrictions.
(ii) Common Area locks can have more than one GCA address and the selected
Time Zones will apply to all of them.
(iii) Common Area doors all have the Passage Mode option, meaning that the lock or
card reader can be put in Passage Mode with a valid Passage Mode keycard.
(iv) Staff may be given automatic access to all Guest Common Areas (option 2 in the
FDU Features Menu).
(v) In this example, the pool and tennis areas have different hours for guest access
(Time Zones #1 and #3), but staff who supervise and maintain the sports facilities
have the same Time Zone (Time Zone #2). The amenities in the example can
only be in Passage mode during normal guest access hours.
(vi) Lock model 760, 740, 710-II, 710 and 700-II do not support the Flexible Time
Zone feature for GCA’s.
To Next Page
Loading...
