SAM
®
RF Operations Manual 98
Section 5: Keys
© SAFLOK WL 12/20/2007
Creating Emergency Keys (continued)
6. Click the open circle next to Staff and click OK.
Note: Emergency keys can only be assigned to staff members.
7. At the Staff List PC dialog box, simply
click on the name of the person to
receive this key and click Select. Any
staff members you previously entered
into the system will be listed in this box.
8. Back at the Create Emergency Key PC
dialog box, the name of the person you
selected will appear in the box under the
words, “The Key Is Assigned To.”
9. When you are satisfied with the settings
for this key, insert a key into the encoder
and click OK.
Note: You must keep the key in the electronic key encoder base while the key image
spins on the PC screen.
Note: Whenever you select the New Key option, a
Warning PC dialog box will appear, indicating that
creating a new key will cancel any other keys of
the same type. If this is the first key of this type
you are creating, click Yes to proceed. Otherwise,
click No to return to the Create Emergency Key
PC dialog box and select the Duplicate Key
option.
To Next Page
Loading...