SAM
®
RF Operations Manual 41
Section 3: The Site Design Process
© SAFLOK WL 12/19/2007
3.3 Entering Suite Information
The next step in the site design process is to input information about any suites your property may have.
Suite locks allow access to smaller groupings of units, where up to ten units are accessed through one
door. An example of a suite lock may be an entry door to an apartment with two or more unit locks inside
on bedroom doors. The SAM RF System allows you to add up to 1000 suites. When you eventually make
unit keys, the keys for any units within suites will be programmed to open both the suite door as well as
their own individual unit doors – not all the unit doors within the suite.
If your property does not have suites, skip to Section 3.5.
1. Click on the Management menu at the top
of the window or the Management icon.
2. Point to Site Design, then select Suite
Locks.
3. Unlike in the Zone Configuration PC dialog box, no suites are
pre-listed at the Suite Configuration PC dialog box. To begin
entering suite information into the SAM RF System, click Add.
To Next Page
Loading...