Kaba Saflok SAM RF - 3.5 Entering Unit Lock Information

SAM
®
RF Operations Manual 46
Section 3: The Site Design Process
© SAFLOK WL 12/19/2007
3.5 Entering Unit Lock Information
The next step is to input information for all your property’s units or apartments into the SAM RF System.
The SAM RF System allows you to add up to 4000 units.
1. Click on the Management menu at
the top of the window or the
Management icon.
2. Point to Site Design, then select Unit
Locks…
3. Click Add at the Unit Configuration PC dialog box.