SAM
®
RF Operations Manual 36
Section 2: Installing the SAM RF System
© SAFLOK WL 12/19/2007
2.7 Using the SAM RF Software
Launching SAM RF
A shortcut to SAM RF has been placed in
the Start menu. To start the program, go
to your computer’s Start menu and select
SAM RF to launch the program.
This will display the Initialization screen
dialog box, or SAM RF System main
menu. Like most Windows-based
programs, pull-down menus appear in the
upper left area of the screen, and only
those features that are active and
accessible will be highlighted. Until you
fully log on to the SAM RF System, only
the File menu will be active. All other
features of the system will be
inaccessible.
Logging on to SAM RF
The SAM RF system offers two convenient
menu access options. You may access items
from the word menu at top of the screen or you
may access the items from the icon menu on the
left hand side of screen. To start the log-on
process, point to the File pull-down menu and
select Log On…
When the SAM RF System is started for the first time, both the
User ID and Password are the same: “ADMIN.” Type “ADMIN” in
the User ID field and the Password field and click OK (or press
ENTER).
To Next Page
Loading...