SAM
®
RF Operations Manual 35
Section 2: Installing the SAM RF System
© SAFLOK WL 12/19/2007
Installing the Electronic Key Encoder and Utility Device (continued)
17. Double click on the SAM RF icon on your
PC desktop to open the SAM RF program.
You will receive a prompt to log on.
18. Log on to the system as discussed in
Section 2.7 “Using the SAM RF Software”.
19. Point to the Management pull-down
menu and select Terminal Settings.
20. Type the COM port number you recorded in Step 14. The electronic key
encoder and utility device are now ready for use.
21. Click OK to complete the installation of the key encoder and utility
device.
To Next Page
Loading...