SAM
®
RF Operations Manual 138
Section 5: Keys
© SAFLOK WL 12/20/2007
Replacing Lost Resident Keys (continued)
4. At the Create Inhibit Resident Key PC dialog box, your first
task is to select the appropriate unit in the pull-down box.
Once you have selected the unit in question, the Select
IDs to Inhibit box lists all resident key IDs created for that
particular unit, along with the names of the residents each
key is assigned to. Simply click in the box to the left of the
resident(s) whose key(s) you wish to inhibit. Click the
button to the right of the box with the message “This Key Is
Assigned To.” (This button has a hand pointing to the
right.)
Note: If more than one Resident key is lost, you can select
more than one key ID to inhibit.
5. To choose a staff member to assign this key to, click the open circle
next to Staff and click OK. This will take you to the Staff List PC dialog
box. To choose a resident to assign this key to, click the open circle
next to Resident and click OK.
Note: Inhibit Resident keys can be assigned to staff members or residents.
6. This will take you to the Resident List PC dialog box.
Click on the name of the person who will be assigned
this key and click Select.
To Next Page
Loading...