SAM
®
RF Operations Manual 26
Section 2: Installing the SAM RF System
© SAFLOK WL 12/19/2007
Installing the SAM RF System Software with Multiple Databases
(continued)
24. After all SAM RF applications and databases are installed, the SAM RF
server’s desktop should display all SAM shortcuts.
To complete this part of the second SAM RF application and database
installation, go to the desktop of the SAM server, and then rename the SAM
RF shortcut to the name of your second SAM RF directory. In this example,
SAMRF2 is the name for the second SAM RF directory and the desktop
shortcut.
25. Click either or both SAM RF icon(s) to display the SAM RF main menu screen.
26. On the main menu screen, click File and then Logon to proceed to the logon
screen.
This will display the initialization screen, or SAM RF
System main menu. Like most Windows-based
programs, pull-down menus appear in the upper left
area of the screen, and only those features that are
active and accessible will be highlighted. Until you
fully log on to the SAM RF System, only the File
menu will be active. All other features of the system
will be inaccessible.
Continue to Section 2.5 to install the USB drivers.
To Next Page
Loading...