SAM
®
RF Operations Manual 75
Section 4: Management Functions
© SAFLOK WL 12/19/2007
Deleting Residents (continued)
5. A Delete Confirmation PC dialog box will appear asking if you are sure about deleting that person.
Click Yes to confirm, and then click Close at the Unit/Resident List PC dialog box to return to the
SAM RF System main menu screen.
6. Repeat the process until all residents vacating a unit are removed from the SAM RF System.
7. Merely deleting residents from the SAM RF System is not enough to ensure the security of your
property. If former residents do not relinquish their keys, they can continue to gain access to common
access areas and to their former unit(s). It is also very important that you collect whatever keys
former residents might have in their possession.
To ensure the security of your property AND the security of the new residents of that unit, it is
important to make sure that any keys in a former resident’s possession will no longer provide access.
To prevent access, you must reprogram the locks that the residents previously had access to. To
reprogram these locks, you need to create an Inhibit Resident key. If a new resident will be moving in
immediately you do not need to create an Inhibit Resident key. When the new resident key is made
and used in the lock(s) it will invalidate the previous resident(s) keys.
Note: If you have new residents to register, follow the process “Adding Residents to the SAM RF System”
described earlier in this section.
To Next Page
Loading...