Kaba Saflok SAM RF - Page 82

SAM
®
RF Operations Manual 77
Section 4: Management Functions
© SAFLOK WL 12/19/2007
Adding Vendors to the SAM RF System (continued)
6. To register employees of a specific vendor company,
be sure you are in the Vendor Company List PC dialog
box. Click on the vendor for which you will be
registering employees and click Employees. This will
display the Vendor Employee List PC dialog box.
7. To register a new vendor employee, click Add. This
will display the Vendor Employee Form – ADD Mode
PC dialog box.
8. Enter as much information as you can about the
employee, including his or her name, position and the
phone number that he or she uses most often. When
you have entered as much information as you wish,
click Save. This will return you once again to the
Vendor Employee List PC dialog box.
9. Continue registering additional vendor employees by
following the same process, or click Close at the
Vendor Employee List PC dialog box and again at the
Vendor Company List PC dialog box.