SAM
®
RF Operations Manual 84
Section 4: Management Functions
© SAFLOK WL 12/19/2007
Editing Existing Work Orders (continued)
9. Other changes that can be made in the Work Order – Edit Mode PC dialog box are: changing the
Priority (Low, Normal or High), its Status (Pending, Open or Closed) and adding more information
to the Job Description and Special Circumstances fields.
10. When you are satisfied with all the changes to this work order, click Save.
Although you have created and assigned a work order using the SAM RF System, it does not necessarily
mean the person to whom the work order is assigned is aware of it. Somehow, that person needs to be
informed that the work order exists and action needs to be taken.
There are essentially two ways to do this: (1) Print the work order out and hand it to the staff member it is
assigned to (call/fax it to the vendor); (2) Provide access to the SAM RF System work orders functions for
responsible staff members to retrieve and edit work orders themselves.
To Next Page
Loading...