KanexPro MX-HDBASE8X8-4K - RS232 Communication Commands; System Commands

4K HDBaseT™ 8x8 Matrix Switcher
MX-HDBASE8X8-4K 17
KanexPro.com
Please set the parameters of COM number, bound rate, data bit, stop bit and the parity
bit correctly, only then will you be able to send command in Command Sending Area.
Parameter Configuration area
Monitoring area, indicates
whether the command
sent works.
Command Sending area
Parameter Configuration area
Monitoring area, indicates
whether the command
sent works.
Command Sending area