4K HDBaseT™ 8x8 Matrix Switcher
MX-HDBASE8X8-4K 28
KanexPro.com
Control 3rd-party Device through 9 pin female RS232 port
4.3.7 Bi-directional RS232 Control
By connecting oneRS232 port with PC (or controlled device), and connecting the RS232
port of corresponding HDBaseT receiver with controlled device (or PC), the RS232
signal can be transmitted bi-directionally.
! Control far-end device from local
Connect the RS232 (3-pinpluggable terminal block) port in any zone to PC, and connect
the controlled RS232 device (3rd party device) to the corresponding (same zone as PC)
receiver, see below:
Control far-end device from local
! Control the KanexPro 8x8 Matrix Switcher from remote