IP TELEPHONE SET
5
Configuring via Web Page
Press OK button on the keypad of the phone to enter the status page and find out the IP
address of IP phone. Enter it (for example http://192.168.3.35) into the address bar of
web browser. The default administrator’s login name and password are admin/admin
.
The default user’s login name and password are user/user
.
Note:
Please locate your PC in the same network segment of IP phone (192.168.3.X) to access
the web configuration page. Please consult your system administrator for help.
Network Settings
Choose Network->Internet Port (WAN）.
DHCP: Under the default situation the phone attempts to contact a DHCP Server in your
network in order to obtain its valid network settings, e.g. IP address, sub mask, gateway,
DNS server, etc.
Static IP Address: If your phone cannot contact a DHCP Server for any reason, you
need to enter the network settings manually via Static IP Address. Please contact your
internet administrator for more details.
PPPoE: If you are using the xDSL Modem, you can connect your phone to the internet
via PPPoE mode. Please contact your ISP for the User Name and Password for internet
access.
Note:
Using the wrong network parameters may result in inaccessibility of your phone and may
also have an impact on your network performance. Please contact your network
administrator.
Account Settings
The phone attempts to register to the SIP server using the parameters obtained by
initialization.
Choose Account, you will find the following parameters:
Field Description
Register Status It shows the register status of the phone.
Account Active You can choose on/off to enable/disable the account
respectively.
Label The name showing on the LCD of current device.
Display Name The local phone name showing on the other phone when
calling.
Register Name Register name provided by ISP.
User Name User account information, provided by ISP.
Password Account password provided by ISP.
SIP Server SIP server address provided by ISP.
To Next Page
Loading...
