IP TELEPHONE SET
14
4) Press Save hot key to save the changes.
5) Press Back hot key to return to the previous screen.
Time and Date
The time and date appears on the idle screen of the IP phone. If the phone cannot obtain
a time and date from the call server, please contact your system administrator if the time
or date is incorrect. You can set the time manually or via the SNTP server which is used
to synchronize the time.
To change the Time and Date via the Phone interface:
1) Press Menu->Settings->Basic Settings->Time & Date.
2) If SNTP Settings is chosen, the phone will automatically get the time from the specific
NTP Server. Use the navigation keys to highlight the specific option and the relating
changes. You can set the Time Zone, NTP Server1/Server2, and Daylight Saving
respectively.
3) If Manual Setting is chosen, the time can be set manually. Use the navigation keys to
highlight the option and enter the specific date and time.
4) Press Save hot key, the time appears on the idle screen will be changed. Press Back
hot key to return to the previous screen.
To set the time format via the Phone interface:
1) Press Menu->Settings->Basic Settings->Time & Date->Time & Date Format.
2) Use the Switch hot key to choose a preferred time format: 12 hour or 24 hour.
To Next Page
Loading...
