IP TELEPHONE SET
63
NETWORK SETTING
PC Port Setting
Please refer to the previous part “Configuration and Registration” for the basic Network
WAN setting information. The following table lists the instructions of the field about the
Network PC Port Setting.
Field Name Description
As Bridge If you select the Bridge mode, then the two Fast Ethernet ports will be
transparent.
As Router If you select the Router mode, the SIP phone will work as a router.
IP address User could configure the PC port IP address.
DHCP Server If you set the DHCP server on, the device connected to the PC port
will get the IP address automatically between the start IP address and
To Next Page
Loading...
