IP TELEPHONE SET
32
enable/ disable the anonymous call function for your IP phone automatically.
5) Press the navigation keys to enter and choose whether to enable the anonymous
rejection function. The feature allows the subscriber to reject all calls from callers
who have blocked the display of their calling identification information (calling
number and calling name).
6) If you want to realize the anonymous rejection by server, please choose and enter
the Reject On Code and Reject Off Code. When you choose to enable the
anonymous reject function on your IP phone, it will send information to the server,
and the server will enable/ disable the anonymous reject function for your IP phone
automatically.
Note:
This configuration is only available for the current default account.
7) Press the Save hot key to save the changes.
To set the anonymous call via the Web interface:
1) Choose Account-> Basic-> Anonymous Call to do the relating changes. Please refer
to the instruction above for the parameters’ detail.
2) Then click the Confirm button to save the changes.
Auto Redial
Auto redial is a telephone feature that redials a busy number in a fixed number of times
before giving up.
To set auto redial via the IP phone interface:
1) Press Menu->Features->Auto Redial ->Enter to enter the configuration page.
2) By the Switch hot key, you can choose whether to enable the auto redial function.
3) Press the navigation keys to choose and set the redial interval, which is used to the
set period to redial again when the call is denied access or expire. It is measured by
To Next Page
Loading...
