KaVo DSE Expert - Page 52

Instructions for use DSE Expert
5 Operation | 5.6 Using functions through the menu
52 / 74
S1
S2 S3 S4
Key Settings
S1 Saves the parameters.
Selects the ENDO menu.
S2 Changes the value.
S3 Changes the value.
S4 Moves the flashing cursor:
Torque mode, speed, torque, torque mode, ... (ring counter).
Set torque mode
▶ The torque mode parameter can be changed after selecting it in the settings
menu.
ð The selected parameter is marked by a flashing cursor on the display.
S1
S2 S3 S4
Key Settings
S1 Saves the parameters
Selects the ENDO menu
S2 Changes the torque mode
Autoreverse, Torque Control only, Autorev. / Forward, Autoreverse,..(ring
counter)
S3 Changes the torque mode
Autoreverse, Autorev. / Forward, Torque Control only, Autoreverse,..(ring
counter)
S4 Moves the flashing cursor
Setting the speed
▶ The speed parameter can be changed after selecting it in the settings menu.
ð The selected parameter is marked by a black triangle on the display.
S1
S2 S3 S4