SCAN EXAM B-9
B. Installation and setup
Location
The location of the device can be entered
here, for example room number or location.
IP address: ..... Edit....
For service personnel only.
Express Share:
If the device is to be used with several PCs
click the Express Share check box to select
this feature.
IMPORTANT NOTE:
If only one PC is connected to the unit do not
select the Use Express Share check box.
Other settings applicable to Express Share
are:
Client name:
A name, for example, user name, location
etc, for the PC being used can be entered
here.
Workstation number:
An identifi cation number for the PC being
used can be entered here.
Autorelease timeout (s)
The length of time that the unit will remain
reserved and unused by a PC before the
PC automatically releases the unit can be
entered here.
The default time is 40 seconds.
If the device is reserved by one PC another
PC cannot use the device until the fi rst PC
releases the device.
The timeout feature ensures that no device
can be permanently reserved and unavailable
to other users.
The device can be reserved in advance from
another PC.
To Next Page
Loading...
Need help?
General
