KaVo uniQa - Assistant Element Reprocessing: Hoses and Connectors; Suction Hose Reprocessing Procedures; Suction Hose Connector Reprocessing Steps

Care instructions KaVo uniQa
2 Reprocessing steps in accordance with ISO 17664 | 2.6 Reprocessing of the assistant element
19 / 56
4 Also refer to: Chapter on Automatic cleaning programmes
4 Pull the latches evenly outwards and carefully remove the handpiece holder.
2.6.2 Reprocessing of the suction hoses
4 Clean the exterior of the suction hoses manually and subject them to wipe
disinfection.
4 The manual internal cleaning and disinfection is part of the cleaning and dis-
infection of the suction system using DEKASEPTOL Gel.
2.6.3 Reprocessing of the suction hose connector
4 Remove connectors ① and ② from the suction hoses.