Care instructions KaVo uniQa
2 Reprocessing steps in accordance with ISO 17664 | 2.9 Automatic cleaning programmes
32 / 56
S-Table
4 Lock the swing arm into the front catching position to ensure that the hand-
piece is removed.
4 In the case of swing arms without a catching function, insert the swing arm
lock (Mat. no. 1.008.1083) to ensure that the handpiece is removed.
2.9.2 Cleaning programme, "After treatment"
The "After treatment" cleaning programme is an automatic program for hydro-
mechanical cleaning of the drainage and separation systems within and outside
the treatment unit. The cleaning process is carried out by supplying fresh, clear
water (limited rinsing). The water is aspirated from the Aquamat through the
filter housing to the separation system. The spittoon bowl rinsing is alternately
turned on and off.
To Next Page
Loading...
