KaVo uniQa - OXYGENAL 6 Bottle Replacement Procedure and Concentration Check; OXYGENAL 6 Bottle Replacement Procedure; OXYGENAL 6 Concentration Check Necessity

Care instructions KaVo uniQa
3 Replacing and checking cleaning and germ reduction agents | 3.2 Replacing the OXYGENAL 6 bottle
51 / 56
4 Remove the cover from the unit base.
4 Unscrew the lid of the new OXYGENAL 6 bottle.
4 Swing out the empty OXYGENAL 6 bottle from the unit base, and pull it
down off the adapter.
The touch screen shows a status message when the bottle is taken out of the
unit.
NOTE
In order to display the "No OXYGENAL bottle" status message, tap first the ar-
row and then the status message. Then the required steps can be done.
4 Press the new bottle onto the adapter, and swing the bottle into the unit
base.
4 Putting the cover back on the unit base.
NOTE
Check the OXYGENAL 6 concentration occasionally in order to check the func-
tion of the germ reduction unit for water and/or the expiration date of the
germ reduction agent.