What to do if KEB combivert R6-S shows Over Current error?
If your KEB Power Supply displays an 'Over current' error, it indicates that the output current is too high or there is a ground fault. To resolve this, check the output current and ground connections.
What to do if KEB combivert R6-S shows Over Voltage error?
If your KEB Power Supply displays an 'Over Voltage' error, it means the DC bus voltage is too high, exceeding 900VDC. You should check and reduce the DC bus voltage to fix this issue.
What to do if KEB combivert R6-S shows Over Load error?
If your KEB Power Supply displays an 'Over Load' error, it means the actual load was greater than 105% and the overload timer timed out. Reduce the load to below 105% to resolve this error.
How to fix KEB combivert R6-S Over temperature error?
If your KEB Power Supply displays an 'Over temperature' error, it indicates overheating of the heat sink. To fix this, allow the heat sink to cool down.
What to do if KEB Power Supply shows Line error?
If your KEB Power Supply displays a 'Line' error, it indicates one or more phases are missing. To resolve this, check the line connections for missing phases.
How to troubleshoot KEB combivert R6-S synchronization error?
If your KEB Power Supply displays a 'Synchronization' error, it indicates that the connection of line phases at the commutation choke is not correct. Check the synchronization of connections to resolve this.
Why KEB combivert R6-S shows Over temperature commutation choke error?
If your KEB Power Supply displays an 'Over temperature commutation choke' error, it means the temperature sensing on the commutation choke indicates it's too hot. Check the temperature sensors and allow the system to cool down.
General| Brand | KEB |
|---|---|
| Model | combivert R6-S |
| Category | Power Supply |
| Language | English |
To Next Page
