KEB combivert R6-S - Special Functions

Seite 3.6 - 10 COMBIVERT R6-S © KEB, 2008-02
Protective functions
3.6.4 Special functions
In these parameters, many different functions for adapting the inverter behaviour to special applications are
pooled.
Pn.19: Operating mode
Value Description
0:Masterwithcommutationchoke For high power regenerative units can be parallel connected.
Here,adevicemustbespeciedasmaster.Allfurtherareadjusted
as slave. Single units are always master.
The coupling of the regenerative units is made by terminals
X2A.1618, since this is a fast digital input
1:Masterwithharmoniclter
2:Slavewithcommutationchoke
3:Slavewithharmoniclter