KEB combivert R6-S - Page 31

Password structure
© KEB, 2008-02 COMBIVERT R6-S Page 2.2 - 3
2
10
2.2 Password structure
The KEB COMBIVERT is equipped with an extensive password protection. With the individual passwords it is
possible:
- to change the operating mode
- to set a write protection
- to activate the service mode
Dependent on the actual operation modethepasswordcanbeenteredinthefollowingparameters:
if the CP mode is activated
if the application mode is activated
2.2.1 Password levels
The parameter value of the parameters above displays the actual password level. The following displays are
possible:
CP - read only
Only the customer parameter group is visible, all
parameters are in read only status, except CP.0
(see chapter 4.3).
CP - on
Only the customer parameter group is visible. All
parameters can be changed.
CP - Service
LikeCP-on,howevertheparameteridentication
is displayed in accordance with its origin parameter
(see chapter 4.3)
Application
All application parameters are visible and can be
changed. The CP-Parameters are not visible.