4-6 Long Integration Measurements
NOTES For GPIB operation:
1. use :SEARch to disable the search for pulses (see the :SEARch command in Table
4-2).
2. :FAST (enables a fast readings mode) can be used with long integration function-
ality (see the :FAST command in Table 4-2).
3. :DETect may be enabled to only detect pulses between user triggered readings (see
the :D
ETect command in Table 4-2).
4. also see “Using FAST, SEARch, and DETect” on page 4-15.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
To Next Page
Loading...
