Getting Started 1-17
Getting around the MENU
• Press the MENU key to activate the menu.
•Use the
â–² and â–¼ keys to scroll through the primary menu items.
• Changing channels: When the main menu is displayed, use the
â–²
and
â–²
keys to change
the active channel (each press of the
â–²
and
â–²
keys will toggle between Channel #1 and
Channel #2).
NOTE If a c
hannel number is not shown, the
â–²
and
â–²
key presses will be ignored. Also the
â–²
and
â–²
key presses will be ignored if a sub-menu only exists on the battery channel
(not on the charger channel).
• The active channel may be changed in the main menu, and the top su
b-menus for pulse
current and long integration. The active channel cannot be changed in all other
sub-menus.
• Select the displayed primary menu item by pre
ssing ENTER. With PULSE CURRENT
or LONG INTEGRATION selected, use the
â–² and â–¼ keys to display the secondary items.
(Again, pressing ENTER selects the displayed item.)
NOTE Befor
e pressing enter, make sure the desired channel is active. If ENTER is pressed
with the incorrect channel selected, press the MENU key (to cancel changes), use
â–²
or
â–²
to toggle to the desired channel, and then press ENTER to select the displayed
primary menu item.
• Display and change settings and selections (for a menu item) using the edit keys
(
â–²
â–²
â–² â–¼):
For a setting, use
â–²
or
â–²
to place the cursor on the desired digit, then use the â–² and
â–¼ keys to increase or decrease the value (unless noted otherwise).
Rapid jump to minimum or maximum: T
o rapidly jump to the maximum value,
increment the most significant digit (the left further-most digit). (Note that if the tens
digit is the most significant but is not displayed, place the cursor to the left of the
units digit.) To rapidly jump to the minimum value, decrement the first leading zero
(or tens digit if there is not a leading zero).
For a selection, use
the â–² or â–¼ keys to display the desired option (unless noted
otherwise).
• With the desired setting or selection displayed, press
ENTER for it to take effect.
Pressing MENU will cancel the edit operation.
• Use the MENU key to back out of the MENU structure.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
To Next Page
Loading...
Need help?
General
