15-6 Disassembly
Instrument reassembly
Reassemble the instrument by reversing the previous disassembly procedures. Make sure that
all parts are properly seated and secured, and that all connections are properly made.
WARNING To ensure continued protection against electrical shock, verify that power line
ground (green
and yellow wire attached to the line filter module) is connected
to the chassis. Also make certain that the two bottom case screws are properly
installed to secure and ground the case cover to the chassis.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
To Next Page
Loading...
Need help?
General
