Keithley 2302 - Basic Power Supply Operation

• Test connections — Explains how to connect DUT to the power supply output and how
to connect an external voltage to the DVM input.
• Outputting voltage and current — Explains how to output voltage and current.
• Output bandwidth — Details Model 2306 output bandwidth control.
• Output impedance — Details Model 2306 variable output impedance feature.
• SCPI Programming — outputting voltage and current — Contains SCPI commands re-
lated to output voltage and current.
• Reading back V and I — Covers the actual V and I display mode, which is used to
measure and display the actual voltage and current being delivered to the DUT.
• SCPI Programming — measure V and I, and DVM input — Contains SCPI commands
related to measuring voltage and current.
• Independent voltage measurements (DVM) — Explains how to use the digital voltmeter
(DVM) to make DC voltage measurements.
• SCPI Programming — DVM — Contains SCPI commands related to DVM
measurements.
• Sink operation — Explains how to use the power supply to dissipate power, rather than
sourcing it.
• Programming examples — Provides two examples: one to output and read back voltage
and current, and one to measure the DVM input.
2
Basic Power Supply Operation
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com